Forum

GMartin · Joined: Feb 5, 2010 Posts: 308

Jarek,

I have a nested design for a threshold. When I create an android design containing it, the design works fine on my PC. The threshold (bar display and slider) does not show on android, Other elements such as video and buttons show up and work fine.

I did use the install files routine to make sure everything needed would get installed.

The BH threshold you created works just fine. Mine is a variant of that with a slider that sets the auto threshold level.

I am not sure how to proceed from here.

Any suggestions

Thanks

George

jarek · Joined: Oct 22, 2007 Posts: 1073

George,

please create android diagnostic file (just after that happens) and send it to me by email.

jarek · Joined: Oct 22, 2007 Posts: 1073

I think the problem was in the installation zip file. It contains additional folder on top: \"android thresh test 2\". This means that your files were probably not installed where you intended them to be.

Make sure, that on top of level you have folders like \"config\", \"design\". Like in the original release.zip file which is created by BioEra.

I did this, installed your example and I think it works (I can see the bar moving). Although I don't know enough about your design to know if that is what you expected.

You would have seen all those errors if you had used the \"Transfer log messages\" option, which prints on Windows BioEra console everything that is printed on Android side.

GMartin · Joined: Feb 5, 2010 Posts: 308

Jarek,

Thanks. I renamed the release folder before zipping it. It seems as though I should simply transfer the folders from the release folder into the zipped archive rather than zipping the release folder.

I will try it out tomorrow.

George